DOUBLE ENDED PROBES AND RECEPTACLES
PART NUMBER 100785-002
for crown (V) tip
PART NUMBER 100785-003 for spear (B) tip Minimum Pitch: 1.27 (.050) Signal Path Length: 9.20 (.362) Force per Contact: 42.5g (1.5 oz.) @ 1.52 (.060) travel Device Compliance: 0.76 (.030) DUT Board Compliance: 0.76 (.030) Operating Temperature: -55°C to 150°C Insertions: > 250,000 Typical Resistance: < 50 mΩ Current Carrying Capacity: 3 amps continuous (Current DC carry capacity @ 80° C steady state) Pattern 2a (RSR): @ 1.27mm pitch Characteristic Impedance: 41 mΩ Time Delay: 47 pSec Loop Inductance: 1.93 nH Signal Pin to Return Capacitance: 1.15 pF - 1 dB Insertion Loss Bandwidth: > 16.2 GHz |
PART NUMBER -100938-001
Device Side Tip - 0.25 4-pt. Crown, PCB Side Tip - 0.25 4-pt. Crown
PART NUMBER-100938-014 Device Side Tip - 0.25 4-pt. Crown, PCB Side Tip - Radius PART NUMBER-100938-016 Device Side Tip - Radius, PCB Side Tip - Radius Minimum Pitch: 0.65 (.026) Signal Path Length: 4.75 (.187) Force per Contact: 31g (1.1 oz.) @ 0.97 (.038) travel Device Compliance: 0.48 (.019) DUT Board Compliance: 0.48 (.019) Operating Temperature: -55°C to 150°C Insertions: > 500,000 Typical Resistance: < 70 mΩ Current Carrying Capacity: 3 amps continuous (Current DC carry capacity @ 80° C steady state) Pattern 2a (RSR): @ 0.65mm pitch Characteristic Impedance: 50 mΩ Time Delay: 31 pSec Loop Inductance: 1.46 nH @ 0.75pitch Signal Pin to Return Capacitance: 0.10 pF - 1 dB Insertion Loss Bandwidth: >2.4 GHz |
PART NUMBER DE-50
Tip Style - Displayed Minimum Pitch: .050 (1.27) Drill Size: #64 - .0350/.0365 (0.89/0.93) Current Rating: 3 amps continuous (Single probe horizontal in air; Temp Rise = 80°C) Spring Force: 2.0 oz. (57g) @ .050 (1.27) travel Operating Temperature: -55°C to 85°C Typical Resistance: < 50 mΩ |
PART NUMBER DE-100
Tip Style - Displayed Minimum Centers: .100 (2.54) Spring Force: 3.0 - 3.0 oz. @ .050 (1.27) travel Drill Size: #64 - .0670/.069 (1.70/1.75) Current Rating: 3 amps continuous (single probe horizontal in air; Temp Rise = 80°C) Spring Force: 3.0 oz. @ .050 (1.27) travel Typical Resistance: < 50 mΩ Maximum Travel: .080 (2.03) Working Travel: .050 (1.27) |
PART NUMBER
R-100-J-DE for Spherical Radius
TIP
PART NUMBER R-100-S-DE for Chisel TIP Minimum Centers: .100 (2.54) Spring Force: 2.7 oz. (77g) @ .070 (1.77) travel Drill Size: #50 Mounting Hole: .068 / .070 (1.73 / 1.78) Insertion Tool: RT-R100 Use with Probe Series: S-100, or ICT-100 
PART NUMBER
R-50C-J-DE for Spherical Radius TIP
PART NUMBER R-50C-S-DE for Chisel TIP Minimum Centers: .050 (1.27) Spring Force: 2.7 oz. (77g) @ .069 (1.75) travel Drill Size: #61 Mounting Hole: .0385 / .0390 (0.98 / 0.99) Insertion Tool: RTR50C Use with Probe Series: Size S-50C and ICT-50C |
PART NUMBER R-075-J-DE for
Spherical Radius TIP PART NUMBER R-075-S-DE for Chisel TIP Minimum Centers: .075 (1.91) Spring Force: 2.7 oz. (77g) @ .070 (1.77) travel Drill Size: 1.45mm Mounting Hole: .055 / .057 (1.40 / 1.45) Insertion Tool: RTR075 Use with Probe Series: S-075, or ICT-075 
PART NUMBER R-100-SS
Minimum Centers: .100 (2.54) Drill Size: #50 Mounting Hole: .068 / .070 (1.73 / 1.78) Insertion Tool: RT-R100 Materials Receptacle: Standard Series: Nickel/silver High Performance Series: Nickel/silver, gold plated Probe Series: This receptacle houses a S-100, ICT-100 or ICT-L100 probe on the top end and an SS100 or GSS100 probe on the bottom end |
PART NUMBER RSS-SS
Minimum Centers: .100 (2.54) Drill SIze: #50 Mounting Hole: 0.68 / .070 (1.73 / 1.78) Insertion Tool: RT-R100 Materials Receptacle: Standard Series (RS): Nickel/silver High Performance Sries (R): Nickel/silver, gold plated Probe Series: This receptacle houses an SS or GSS probe on each end. Headed plunger only on top side. |
TEST-X FIXTURE PRODUCTS
7117 ARLINGTON AVE, STE G, RIVERSIDE, CA. 92503
Ph 951-688-3067
EMAIL testxinfo@gmail.com
7117 ARLINGTON AVE, STE G, RIVERSIDE, CA. 92503
Ph 951-688-3067
EMAIL testxinfo@gmail.com